The Stone - Fortified 2x2 Sealed Support FOB

Xenotork1天前建于 4小时前3 个建造阶段0 赞 · 1 收藏

Fortified 2x2 Sealed Support FOB - Fob Optional, small enough to fit within existing fobs. - Sealed design - 2 talon towers with peaks - up to 2 mortar pits - 2 offensive bunkers - wall bastions Phase 1: 1 - Place fob and surround with walls raised half high. 2 - Place a second layer of walls to create a + shape to the right of the fob walls. place a shelter in the opposite corner to the fob and replacing the large hescos at it's openings with small ones. 3 - pad the other corners with small hescos and fit recon towers with the ladder facing in while the pathway leads out to the 5th row. 4 - Fill in the outer hescos of the recon towers' base to make a straight hall, place two doors as shown to add some security. Phase 2 1 - cover outer walls with bremers and create bastion peaks, be sure to build yourself into your fob. 2 - place bremers on the roof as shown and create talon towers. 3 - place mortar and talon launchers phase 3 1 - reinforce surrounding area with wire and hogs for further security. 2 - repair as needed. Notes: Recommended for a squad of 2-4. This support fob is small enough to be built within or alongside existing ones, you can replace the fob with another shelter and mortar pit if that's the case. This fob is sealed so you will need to remove one of the bastion bremers for easy exits, there are security doors under the recon towers just in case, and 2 defensive peaks for the inside of the base for extra security.