The Rock

Xenotork2天前建于 22小时前4 个建造阶段1 赞 · 1 收藏

Fortified 3x3 Compact Multi-role FOB: - 1-way, self-sealing entrance - EZ repair / replace interior - Space for up to 2 Drills - Interior APC spawn bunker - Stinger pit - 2 mortar pits - Centralized CWIS - 2 Talon towers - 2 offensive recon towers - full coverage peaks and wall bastions Stage 1: *Be sure to align your FOB and walls with your Compass for precise placement!! 1 - place FOB, surround with Hesco walls raised half height. knock out wall closest to terminal and place a door facing outward. 2 - Place fire shelter off the door to the FOB, Place 3 more Shelters to make a t-shape, knock out the 2 blocks on the outerwall at the end to make room for an APC. 3 - Place a wall on the left side of the two shelters at the ends of the row, knock out the block to the left of the center in both the shelter and wall, replace wall hesco with small block. 4 - Place a 4x5 area of small hescos to fill out the corner in front of the wall, place 2 large hescos off the wall. 5 - Place 5x5 walls FOB-side connecting each corner of the rest of the base together, 4x5 shelter-side. knock out the 4th block on the far corner and place a door facing outward. 6 - place hescos to fill the wall and apc bunker, but wait till you finish the roof bremers to build them. Continue to cover the outer wall with bremers, build out the entrance, and create bastion nooks around the small hesco corners as shown. *step and door will need to be free placed to stack bremer. Phase 2: 1 - Climb ontop of of shelters and place recon towers on the hesco corners, ladder should align with small hesco in the wall, fill in the outer 2nd layer with large hescos and clear the one at the end to make a straight hallway. Place bremmers as shown. 2 - Place mortars, stinger, and cwis where available. 4 - make way for the APC if avaiable, fill in the sides of the wall leaving the the center opening, park the APC as far as you can into the shelter and close the outer wall with pre-placed hescos and fill bremer wall. (Players should spawn inside if done right) Phase 3: 1 - place talons ontop of 3-high steps, and drill(s) in their place. 2 - Cover outer wall area with hedghogs and corners with detterent wire. 3 - Repair from inside the shelters as needed, replace entire shelter segments for quick repair, maintain drill and spawn bunker bremmers as much as you can. Notes: The entrance of the FOB is 1-way, you must open the door from the inside to let people in, please remember to close this door on your way in, you can jump out of the base over the top walls. You can remove the door to seal the base. The defensive bastions are there to clear enemies from your walls and adjacent angles. Roof bremmers cover very well from high angles and explosives, be sure to pay attention to mortar fire. This FOB fits nicely in the Swamp market lot, within tower lots, and clearings. Im still in the process of finding other good spots that are out of the way of other popular areas to plant FOBs.